Marika's Soreseal talisman - Elden Ring

Marika’s Soreseal Talisman from Elden Ring ✨

A high-detail recreation of Marika’s Soreseal from Elden Ring, designed as a display piece, collectible prop, or wearable talisman.

This model is based on the legendary in-game talisman described as an eye engraved with an Elden Rune and said to be the seal of Queen Marika. In game, Marika’s Soreseal greatly raises Mind, Intelligence, Faith, and Arcane, while also increasing damage taken.

Designed to capture the organic eye shape, thorn-like outer frame, central wound/rune detail, and cursed relic appearance of the original talisman while still printing cleanly on FDM printers.

🔧 Print Notes

✓ Designed for Bambu CoreXY printers
✓ Tree supports recommended for cleaner results
✓ Print orientation is already set in the profile
✓ 0.08mm layer height recommended for best detail
✓ Matte grey PLA is what I used, but feel free to use any color or material you like
✓ Slow outer walls can help preserve the rune and edge details
✓ Works great as a display piece, cosplay accessory, or collectible prop

🧼 Before Printing

Please clean your build plate before starting the print. A dirty or oily plate can cause lifting, warping, or poor bed adhesion, especially on detailed prints with smaller contact areas.

Recommended prep:

✓ Wash the plate with dish soap and warm water, then dry fully
✓ Avoid touching the print surface after cleaning
✓ Use glue stick or liquid glue if your plate normally has adhesion issues
✓ Add a brim if you notice edge lifting or instability
✓ Watch the first layer to make sure it is sticking evenly before walking away

📏 Scaling

Scale up or down depending on your display, cosplay, or wearable needs.

If scaling smaller, some of the finer rune, thorn, and surface details may become less visible. For the cleanest result, I recommend keeping the model at the uploaded size or scaling up slightly.

⚠️ A1 / A1 Mini Note

This profile was tuned on CoreXY machines. It should still print on A1 / A1 Mini, but slowing speeds slightly and using a brim can help with stability.

A dedicated A1 / A1 Mini profile may be added later.

🌑 More Elden Ring Prints

If you like this print, check out my other Elden Ring 3D prints below:

Elden Ring 3D Prints Collection: (Click the image)

I’ll be adding more Elden Ring talismans, weapons, wall displays, cosplay props, Zelda-inspired prints, anime-related models, and collectible display pieces regularly.

If that sounds like your kind of stuff, a follow would help a ton and you’ll see new models as they go live 🙌

If you print this, I’d love to see how it turns out. Feel free to share your results, painted versions, or display setups