The Great Cornholio TP Holder

Here is my take on the great Cornholio!  Never run out of TP again.   Designed with maker world picture to model, with the base and accessory rolls built in fusion.   Needs supports.  Needs Glue.  Use high wall count for strength, and use higher infill too if required.  The arms can be a fragile if not printed thick enough.  Might be worth using modifiers on the arms just to increase the wall count/infill percent without it adding a ton of filament to the large part of the body. The spare TP rolls will need to be glued in - make sure to test fit the 2 single rolls to before gluing to make sure they're oriented correctly.    Highly recommend using a tool/nozzle changer printer - or it will be a mega long print.   I had some problems with bleed through on the yellow - the filament I picked wasnt opaque enough - a matte filament will probably work great and not bleed the lower colors. 

***** NEW PROFILE ADDED *****  fixed Beavis - added hair.  added modifiers for arm strength!  If you dont have a 5 color system just map the hair to black and add a pause to swap colors once sliced.