Sailor Moon and Luna

Wife keeps asking me for some sailor moon one's so expect a few in the works!

Project: Skinny Crescent Moon fixing.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #0a2989 PLA #BambuLab Basic Blue  Transmission Distance: 2.2
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.5
    #f4ee2a PLA #BambuLab Basic Yellow  Transmission Distance: 6
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3.2
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #7 (0.64mm) swap to BambuLab Matte Dark Blue
    At layer #9 (0.8mm) swap to #BambuLab Basic Blue
    At layer #13 (1.12mm) swap to BambuLab Basic Red
    At layer #17 (1.44mm) swap to BambuLab Basic Hot Pink
    At layer #20 (1.68mm) swap to #BambuLab Basic Yellow
    At layer #23 (1.92mm) swap to BambuLab Matte Mandarin Orange
    At layer #24 (2mm) swap to BambuLab Matte Ivory White for the rest.