Massey Ferguson MF133 Detailed Tractor Model

Massey Ferguson MF133 - Detailed Tractor Model

About the Model: Get a piece of agricultural history on your desk! This model is a detailed replica of the legendary Massey Ferguson MF133 tractor. Whether as a gift for agricultural machinery fans, a decorative object for a display case, or a great painting project – this small tractor looks good everywhere.

In the photos, the model is printed in matte black, which gives it a noble, raw prototype look. Of course, it can also be excellently painted in the classic Massey Ferguson red!

Print Settings & Recommendations: To best highlight the many small details (such as the exhaust, steering wheel, and tire treads), I recommend the following settings:

• Layer Height: 0.12 mm or 0.08 mm (for maximum details).

• Wall Loops: 3, for sufficient stability for the delicate parts.

• Infill: 15% - 20% (Gyroid or Grid).

• Supports: Yes, absolutely necessary. I recommend Tree Supports, as they are easier to remove from delicate parts like the axles and steering wheel.

• brim: A brim is recommended if the contact surface of the tires to the print bed is too small.

Material Recommendation:

• PLA Matte: Hides layer lines excellently and gives the model a very realistic look.

• Also perfectly suited for resin printers (SLA) if you want to bring out even finer details.

Post-Processing: If you are not printing the model in one piece (if you have separated the parts), a little superglue is sufficient for assembly. The model can be wonderfully painted with acrylic paints – a slight "Weathering" (dirt effects) makes the tractor look as if it just came from the field!