Air conditioner condensate non-return siphon
Print Profile(1)
Description
I present to you a very convenient siphon for air conditioner condensate; useful mainly to prevent bad odors from rising for those who insert the tube into column drains or drains in general, however, it can also be used to prevent insects from rising for those who discharge into the garden or into containers.
Simple to use, just connect it at least 1.5m vertically on the air conditioner tube to avoid causing blockages; in fact, 1.5m of tube above the small siphon I propose will ensure that water is pushed by gravity.
The two pipe fittings have a circumference ranging from a minimum of 16mm up to a maximum of 20mm, but be careful as some materials tend to shrink, take this into account!
Attention: this model is solid, if you print with the specifications you find, everything will be fine, if you need them, insert supports. I will soon fix it or recreate it from scratch on the 3D modeling application I use.
Postscript: if you change the wall and infill settings, it will no longer work, in which case please take responsibility for it and do not rate stars out of frustration.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)