Ice Princess Foldable Castle

Large Ice Princess Play Castle

After countless hours of work, it's finally finished! My 2nd play castle in the Ice Princess style!

The castle is inspired by Frozen Castle Arendelle. It can be unfolded to the left and right, offering a large play area.

The castle can be printed using the Print in Place method; you just need to carefully remove the supports (preferably with a fine knife), and then you can open and close it. The throne is integrated directly into the castle.

The accessories and the figure are printed separately and can be customized in any color. The stairs can be easily attached. If you want to close the castle, you must remove them again and place them inside the castle.

There are two versions available as print profiles, a larger one and a smaller one:

• large version: 240 mm tall, 500 g filament, 1d2h38min print time (white castle in the picture)
• small version: 150 mm tall, 200 g filament,  12h46min print time (black castle in the picture) - also suitable for the A1 Mini

!Please note that this is a large and long print. It is absolutely essential that the filament is completely dry and of good quality, that the print plate is clean to avoid adhesion errors, and that your printer's print settings are correct!