Washers DIN 125 - various sizes - M2 to M30

DIN 125 3D-Printed Flat Washer Assortment (M2 to M30)

This comprehensive digital assortment provides precise flat washers designed according to the DIN 125 (Type A) standard. It covers all standard metric bolt sizes from M2 up to M30. Perfect for prototyping, light mechanical applications, spacers, or insulation needs in model making and workshop projects.

📐 Included Sizes

• Small: M2, M2.5, M3, M4, M5, M6, M8, M10
• Medium: M12, M14, M16, M18, M20
• Large: M22, M24, M27, M30

⚙️ Recommended Print Settings

To ensure maximum functionality, strength, and flawless aesthetics, please configure your slicer with the following settings:

• Infill Density: Use a high infill of 90% to 95%. If your printer is well-calibrated and does not suffer from over-extrusion, you can go up to 100% (Solid Infill) for maximum compressive strength.
• Top/Bottom Surface Pattern: Set this to Concentric. A concentric pattern follows the circular geometry of the washer, resulting in a beautiful, clean finish and a more even distribution of mechanical stress.
• Material Selection: Standard PLA or PETG works great for basic applications. For high-temperature environments or higher mechanical loads, industrial filaments like ABS, ASA, or Nylon (PA) are highly recommended.

💡 Benefits of This Collection

• On-Demand: Never run out of washers again—just print the exact size you need, when you need it.
• **Accurate Dimensions:**Modeled strictly after DIN 125 specifications (inner diameter, outer diameter, and standard thickness).
• Fully Scalable: Easily scalable in your slicer if you need custom thicknesses.