Pierce The Veil, Misadventures Album - HueForge

I thought Pierce The Veil's “Misadventures” album cover was a perfect candidate for the HueForge treatment. It is configured to be “front lit” (not really a lithophane), but I think it looks great in the lightbox. It fits perfectly in one of the lightbox frames that get generated by the Maker World “Make My Lithophane" MakerLab feature. I'm not including that frame here in the project (the settings are all different), but if you want the lightbox frame, just go generate any lithophane (configured with the square “3 light panels(1:1), 152*152” option) and download the .3mf file and it will include the frame with optimal print settings.

I will include some Maker's Supply LED lights here in the Bill of Materials (you'll need to use 3 of the 4 that come in that kit), but you can also get them on Amazon (I've used this one and it worked perfectly). If you purchase the “12 PCS Lithophane LED” option, that will provide enough LED panels to frame four similarly sized lithophanes/HueForge prints.

I think the Bambu PLA Matte “Scarlet Red” is a great match. You can probably use any decent white filament as the base.

Here is the related information generated from HueForge:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 155.91x155.91mm in size

 

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.91998mm

 

#ffffff PLA Inland White Transmission Distance: 5

#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2

This print uses 2 unique filaments

 

Swap Instructions:

Start with White

At layer #12 (1.04mm) swap to Scarlet Red for the rest.