West Slope Pro 180 iPhone Pro with Moana Angled Up

## Description

If you film your MTB rides with an iPhone in a **West Slope Pro 180** chest pack, you know the problem: the phone sits flat, you see your stem more than the trail, the Maono mic receiver hangs loose, and one wrong bump can hit a side button.

This tray solves all of it.

The **West Slope Pro 180 iPhone Pro Tray** is a custom-printed insert designed to sit inside the camera window of the West Slope Pro 180. It holds your **iPhone 15/16/17 Pro** (caseless) at a **10° upward angle** so your camera sees more trail and less cockpit. Side cutouts keep every button accessible without letting anything press accidentally during the ride.

The **Maono wireless USB-C mic receiver** slots into a dedicated cutout at the base of the tray. A small access hole on the bottom lets you reach the receiver's pairing button without removing anything from the pack. The receiver is protected from bumps but its indicator LEDs remain visible through the window.

Two wide wedge tabs at the top are sized to catch the inner lip of the West Slope Pro 180 camera window frame. Press the tray in and it seats itself — the tabs lock the tray as deep into the window as possible to give the iPhone cameras the widest, most unobstructed view.

**With the Maono receiver installed**, clearance is tight by design — the tray pushes the phone as deep as it can go while keeping the receiver protected. The top of the window frame is just barely out of frame. **Without the receiver**, the tray sits even deeper and the cameras have full clearance.

Remove your iPhone from any case before loading. That's the only requirement.

Designed and printed by **Fireball 3D**.

---

## Features

- **10° upward viewing angle** — tilts the iPhone toward the trail instead of the cockpit

- **Dedicated Maono USB-C receiver cutout** — receiver sits protected at the base of the tray; no loose cable flopping around

- **Receiver button access hole** — reach the Maono pairing/power button through the tray without removing anything

- **LED indicator window** — Maono receiver status lights stay visible through the pack window

- **Side button relief cutouts** — volume, power, and action button areas are open and accessible; no accidental presses while riding

- **Top locking tabs** — wide wedge tabs catch the inner lip of the camera window frame and seat the tray as deep as possible

- **Maximum camera clearance** — positions the phone at the optimal depth to minimize window frame in shot

- **Snug caseless fit** — designed for bare iPhone 15/16/17 Pro; remove all cases before loading

- **Specific fit:** West Slope Pro 180 camera window — not a universal mount

---

## Compatible With

- **Pack:** West Slope Pro 180 (camera window insert)

- **Phone:** iPhone 15 Pro, iPhone 16 Pro, iPhone 17 Pro (caseless only)

- **Mic:** Maono wireless USB-C mic receiver

> **Note:** You can add negative cube and remove the Maono box at bottom — the phone will sit even deeper in the window with slightly better camera clearance.

---

## Print Settings

| Setting | Recommended |

|---------|-------------|

| Material | PETG |

| Layer height | 0.2mm |

| Infill | 25% |

| Supports | None required |

| Orientation | Print flat (tray face down) |

| Wall loops | 3+ |

> **Color tip:** Red filament looks great against the black West Slope Pro 180 that has red accents, but any color works.