Search models, users, collections, and posts
Auston Matthews - Toronto Maple Leafs - Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.8 h
1 plate
Open in Bambu Studio
Boost
0
0
0
0
0
0
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.33mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Blue
At layer #13 (1.12mm) swap to Beige
At layer #18 (1.52mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)