Farm House - HO and N scale
Print Profile(2)
Bill of Materials
Description
Porch light is on. This HO scale farm house looks cozy with the porch lit with a soft glow. Easy to assemble with little glue required to secure the front dormer and chimneys. It measures approximately 106mmx169mmx88mm.
Why does it take so long to print? The print profile is painted using the paint tool in Bambu Studio with the focus on dual nozzle printing. The trim painted on the full house and roof requires a swap almost every layer. Simply choose the colour at print time or modify in Bambu Studio. (A single colour model takes about 13 hours!). The window panes use Translucent PLA. They can be deleted in the object listing if glassless windows are preferred.
Care is needed placing the windows as the window holes may have a little material in the top requiring cleaning with a file or light sanding. Be especially careful installing the small windows in the dormers.
All filament used is Bambu matte with the exception of Support for PLA and Clear Translucent PLA for the windows.
The main house and roof use .16mm layer height while the windows use .12. Most setting are set at the object level specifically.
Support for PLA is needed for clean window frames. If window panes are removed, due to preference, the windows do not need Support for PLA - the setting should stay the same and only adjust the top support height to .08mm from 0.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)