The Bralento Ritual Reed Diffuser

The Bralento Ritual Reed Diffuser – Slim Monolith is a minimalist, 3D-printable reed diffuser designed as an elegant and exclusive ritual object for modern interiors

As part of the Bralento Ritual Series, it features the collection's signature vertical fluting — clean, architectural, and intentionally minimal Unlike mass-market reed diffusers that are often short and bulky, this design introduces a tall, slim, and monolithic silhouette The outer body and base align seamlessly, creating the look of a single, continuous sculptural object

The Linear 7-Hole Layout

The completely flat top features a specialized 7-hole linear reed layout:

• 1 center hole (tighter fit to hold the middle reed perfectly straight)
• 3 left and 3 right holes (slightly wider to allow the reeds to angle outward)

This unique layout guides the reeds into a subtle, refined V-shaped fan, offering a highly decorative appearance that elevates any space compared to traditional chaotic openings

Practical and Clean Design

The diffuser utilizes a removable inner container for the fragrance liquid This independent core makes the assembly incredibly easy to clean, quick to refill, and highly practical for everyday use

The model consists of:

• Outer Tower
• Base
• Removable Inner Container
• Optional Signature Label
• Separate B-Inlay

The Signature Label is optional, but honestly: print it It gives the diffuser that extra premium detail — and yes, it looks exceptionally good

Print Notes and Recommendations

General Support: OFF (The entire model is designed to print completely without supports)

Outer Tower and Base

• Layer height: 0.20 mm (good balance) or 0.16 mm (for an ultra-smooth premium surface)
• Wall loops: 3 recommended or 4 optional for a heavier, more solid feel
• Infill: 15–20%
• Material: PLA or PLA Matte (as shown in the product images)

Inner Container (The Core)

• Layer height: 0.20 mm or 0.16 mm
• Wall loops: 5 (Crucial for watertightness!)
• Infill: 20–30%
• Material: PETG recommended (More chemically resistant to oils than PLA)
• Note: Always test the printed container with water for 24 hours before filling it with fragrance oil

Signature Label and B-Inlay

• Layer height: 0.12 mm (Extra Fine)
• Hardware: 0.4 mm nozzle works perfectly
• Orientation: Print flat on the build plate

Hardware and Capacity Specs

• Recommended Fill Amount: Up to approx 90 ml of fragrance liquid (designed with an integrated safety margin)
• Recommended Reed Sticks: For the intended look, use 25 cm to 30 cm reed diffuser sticks with a diameter of approximately 3 mm

Safety and Usage Note

This model serves as a decorative housing containing a removable fluid core

Because different filaments, slicer settings, and specialized fragrance liquids vary greatly, you must test your inner container for watertightness before final use

Do not overfill Place the diffuser exclusively on stable, flat, and liquid-resistant surfaces While PETG offers great chemical resistance, long-term compatibility with every proprietary fragrance oil recipe cannot be guaranteed Keep away from children, pets, open flames, and active heat sources

Chinese Description / Chinese Description

The Bralento Ritual Reed Diffuser – Slim Monolith is a minimalist, elegant, and premium-feeling reed diffuser, suitable for modern homes, bathrooms, offices, bookshelves, side tables, or desktops

This design belongs to the Bralento Ritual Series, continuing its quiet, vertical, and delicate textural language The overall shape is tall, slim, and clean, unlike traditional diffusers which are often short and bulky or ordinary; instead, it resembles a modern interior design accent piece

The top features a completely flat design with 7 linearly arranged reed holes:

• 1 center hole to keep the central reed relatively straight
• 3 left holes
• 3 right holes

This allows the reeds to form a soft V-shaped fan effect, making the overall appearance more elegant, balanced, and decorative

The model includes:

• Tower / Outer Shell
• Base / Base
• removable Inner Container / Removable Inner Container
• Optional Signature Label / Identification Label
• Separate B-Inlay / B-shaped Inlay

The Signature Label is an optional part, but it is strongly recommended to print and install it It can make the overall appearance more complete and give it a more premium design feel

For the best visual effect, it is recommended to use:

• 25 cm long diffuser reeds
• Reeds with a diameter of approximately 3 mm

Recommended maximum fill volume:

• Approximately 90 ml of fragrance liquid
• The inner container has a certain safety margin reserved

The removable inner container is recommended to be printed with PETG, and it should be tested with clear water for leaks before adding fragrance liquid

Printing Recommendations

Tower / Outer Shell:
Print in normal orientation
No supports needed

Base / Base:
Print in normal orientation
No supports needed

Inner Container / Inner Container:
Print in normal orientation
PETG is recommended
Before using fragrance liquid, first test for leaks with clear water
No supports needed

Signature Label / Identification Label:
Print flat
No supports needed

B-Inlay / B-shaped Inlay:
Print flat
No supports needed

Recommended Settings

Tower / Base:

• Layer height / Layer height: 0.20 mm, suitable for a balance between quality and print time
• 0.16 mm can be used for a more refined premium surface finish
• Wall loops / Wall loops: 3 loops recommended
• Infill / Infill: 15–20 %
• Material / Material: PLA / PLA Matte tested
• Support / Support: Off

Inner Container / Inner Container:

• Layer height / Layer height: 0.20 mm or 0.16 mm
• Wall loops / Wall loops: 5 loops recommended
• Infill / Infill: 15–20 %
• Material / Material: PETG recommended
• Before use, always test watertightness with clear water

Signature Label / B-Inlay:

• Recommended 0.12 mm Extra Fine
• 0.4 mm nozzle prints normally
• Print flat
• No supports needed

Safety Notice

This model serves as a decorative housing for a reed diffuser, with a removable inner container

Before use, please test the inner container for leaks Different materials, print settings, and fragrance liquid brands may produce different results

Do not overfill Please place on a stable, flat, and liquid-resistant surface for use

Fragrance liquid compositions vary and may affect different materials While printing the inner container with PETG is recommended, long-term full compatibility with all fragrance liquids cannot be guaranteed

Keep away from children, pets, open flames, and heat sources