LED Floor Lamp - WLED Powered!
Print Profile(2)
Bill of Materials
Description
A sleek, minimalist floor lamp housing an RGB LED strip. Easy to assemble and a quick print. Power cord routes cleanly through the base. Great for mood lighting and room ambiance.
The microphone is completely optional — only needed if you want audio-reactive lighting.
Parts List:
- ESP 32 Controller
- 5V Power Supply
- Diffuser Channels
- WS2812B LED Strip
- Digital Microphone
- ESP32 Case by PLAUK
- 24 AWG Wire Kit
- M3 Screw Kit
If you don't want to create the WLED microcontroller yourself, here is a good option of a tiny premade controller: Gledopto ESP32 Mini
Assembly Instructions
- Print your desired profile (DIY controller vs. premade controller version)
- Add LED strip from top of the lamp body to top of diffuser channel
- Trim diffuser to be flush with the top of the lamp base
- Solder on wire and JST connector to your LED strip
- Drill 3mm holes in diffuser channel to line up with holes on the lamp base
- Secure diffuser channel with 3x M3*6 screws
- Connect your barrel plug adapter to power & ground wires for the controller and LED strip
- Wire the ESP32 according to the version you chose
- Add JST connector on the power, ground, and data wires going to the LED strip
- Secure ESP32 and barrel plug adapter to base
That's it! Plug it in, connect to the WLED app and you should be up and running!
If you have any experience with WLED, this should be a pretty simple assembly… if not, it's not hard to learn! Here is a great video to refer to and learn about addressable LEDs:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)