Appa - Avatar the last airbender | NO AMS & AMS

Add Appa (from Avatar the last Airbender) to your collection with two print options, whether you have an AMS or not.

✅ Included versions

• AMS Multicolor
  Clean color separation for a polished and faithful final result.
• NO AMS Multipart
  Parts are separated for single color printing with a simple and satisfying assembly process.

🧩 Assembly

• Designed for clean assembly
• Parts fit together nicely, but some areas may require a little pressure
• Glue is recommended for a stronger and more permanent result
• For the face, assemble the parts in this order:

1. Insert the tongue first
2. Insert the eyes into the upper face part
3. Attach the upper face part
4. Attach the lower face part
5. Finish with the nose

• Assemble the belly before attaching the legs

• The belly can be a little tight: insert it at an angle, then push gently until it fits into place. 

  (This tighter belly fit was necessary to keep the belly as one single part)

💡 Tips

• Dry fit first to check alignment before gluing
• If a part feels too tight, lightly sand the peg or slot
• Use tweezers for the smallest parts if needed

🖨️ Print recommendations

• Layer height: 0.16 mm
• For sharper details: 0.12 mm also works very well
• Infill: 10 to 15%
• Supports: only if needed depending on your print orientation

📌 Notes

• Fan made model inspired by an iconic character
• Not affiliated with or endorsed by any rights holders

❤️ Support

• If you like the model, a Like or Boost really helps

Give me a boost if you like my work :-)

Explore my my profile to see all my other models