Search models, users, collections, and posts
M1 Ultra Riser Plate & Electrostatic mat holder
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
19.3 h
3 plates
Open in Bambu Studio
Boost
1
9
0
0
2
1
Released
Description
![IMG_1250.MOV [video-to-gif output image]](https://makerworld.bblmw.com/makerworld/model/DSM00000002880071/design/1af638fc-8f4d-4603-9991-e3a08eba588e.gif?x-oss-process=image/format,webp)
A simple riser for the… riser
- Holds the base plate & the electrostatic (at the same time) or creates room under the machine
- Allows the vent to continue venting
- Holds the baseplate with the screws in their magnetic holder (enough height)
Construction instructions
- Print all three plates, slot together as shown, glue if needed
- Glue with the base plate or electro static in the holder to ensure it is in the right position when glueing and not at an angle
- Position the riser riser slightly forward of the machine to support the folding tray when open
If you like the design, consider buying me a coffee using the link below
https://buymeacoffee.com/oddity3d
Thanks!
License
This user content is licensed under the MakerWorld Exclusive License.
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)