Fire Department Photo Frame

Customizable Fire Department Photo Frame

I needed to create a photo frame for a retirement party so I printed it.

Use standard 10x15cm size photographs.

The support points printed on the back of the truck have been placed at a distance that allows for easy insertion of the photograph

About 3 hours and 40 min of printing with AMS.

The front is 2 millimeters thick to prevent deformation, completely solid and without infill.

4 colors:

1. Black
2. Red
3. Grey
4. Jade White

Assembly instructions:

Support points are automatically printed on the back of the truck; glue the front there, being careful not to let it protrude from the sides of the truck.

Once the glue is dry, you can insert the photo from the top; you can add and remove any photos you wish.

Standard 10x15cm size photos can be inserted.

If you liked the project, leave a "like"

If you want to support me, you can buy me a coffee with a BOOST