Bikemount for diff sizes(Sturdy, quick lock, GIF)
Print Profile(5)
Description
IMPORTANT: Look at drawing below for info etc.
So I made my own version of bike wall hanger to save space in my smaller garage!
I wanted a sturdy mount, so if I accidently bumped into the mount (with no bike in it) It would not break. and ofcourse a sturdy model with the bike mounted aswell :)
As you can tell in the different print profiles I made different mounts for different kinds of width.
The only thing that changes with the different profiles is the width and the location of the holes/amount of holes :)
Each profile have 2 different "lock" sizes, a long and a short one. Remove the one you don't desire more info about size in the drawing below!!
Print settings:
Material: I have used PLA and it have been hanging on the wall for 3 months+ BUT PETG could be recomended if you live in a hot climate and or need more strength/flex.
walls: 3 for the Mount and 4 for the “lock”
Bottom shell thickness: 2mm
Top shell thickness: 2mm
Infill: Gyroid 30%
Supports : NO
Print orientation: Mount should be standing (Like you mounted it on the wall)
and the “lock” should be lying down for best strength!!
remember to clean plate prior and use brim if you have trouble with adhesion
Happy printing and if you liked the model feel free to check out my other models aswell :)!
SEE PICTURE BELOW FOR INFO:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)