A2l/A1 Ams lite top mount
Print Profile(1)
Description
AMS lite A1 top mount - No Tilt Remix (COPY)
This is a 'no tilt' version of the AMS top mount for better clearance and aesthetics
- The angle of the part is still tilted 5 degrees, which makes the AMS stand straight
- The latch has been thickened and has screw holes to reinforce it
- I have added foam pads under the Z-axis brace to make the entire printer more stable I don't like the printed ones
- Mine works perfectly, but use it at your own risk
- I printed it with Bambu Lab - PLA Basic - Light Gray to match the main color of the printers
You can buy the necessary hardware kit here:
http://store.bambulab.com/products/ams-lite-top-mount-screws-kit
Also add two M3 screws to the locking mechanism to improve stability The idea comes from @orangetech
If you already have the original printed, I still recommend everything except the large screw, because not only the top part, but every piece is slightly different But if you want, you can print just the top part to see if you like it
Original creation:
https://makerworld.com/en/models/92486?designId=92486#profileId-100105
ENJOY!
✨ Do you enjoy my designs? Please boost, like, and follow me! Your support makes a huge difference! ✨
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)