NeeDoh Clicker v2 - Cube

NeeDoh Cube clicker Ver2

• This is my NeeDoh Cube clicker version2. Now a perfect cube with no parts sticking out or overlapping, which makes it appear more like a NeeDoh Cube 
  • June 5 2026 - updated the inner piece so it is slightly smaller so it no longer rubs, feels a lot better now :)

• Great for NeeDoh fans or fidget clicker fans or anybody who loves a good clicker. Satisfying and squishy! Easy print with fast print time. 

• To assemble - Put the keyboard switch into the base (the smaller piece) first, and then push that into the top (bigger) piece. It might take a little bit of force but it should fit and will probably be quite snug, which is a good thing as you don't want it falling out :)
   
• I have also included a few different versions with different logo placements
  • Also you can now do multi color print so you can match the NeeDoh logo if you wish
  • minimal filament changes and around a 1 hour print time.
  • For the multicolor print it is recommended to use the models with the the logo on TOP (see build plate description) and you then print with the logo facing down so it will print the multiple colors first :)  Models should already be oriented correctly. if you get the slicer to auto orientate the models it sometimes puts them on their side which then requires supports and greatly increases the print time.

•  This does require a KEYBOARD SWITCH to function. I use Brown switches as they quieter and have a satisfying motion, but any keyboard switch that is similar should fit. I have also used Beige switch as well. You can find them on places like Amazon, and the switches are quite inexpensive.  
  These are the brown ones i use:  https://www.amazon.ca/dp/B0GQSXG71W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=19964