Taylor Swift Singing V2 COLORED for U1 or BambuAMS

🎤 Taylor Swift Singing 90mm Miniature - V2 FULLY COLORED! ✨

After countless requests from the community, I am beyond thrilled to introduce Version 2 of the beloved Taylor Swift singing miniature—now FULLY COLORED and ready for both Bambu printers with AMS and also Snapmaker U1 users!

Say goodbye to the primer and paintbrushes. This 90mm model has been meticulously painted in the slicer and optimized for 4 colors, bringing Taylor to life right off the build plate. Whether you're a die-hard Swiftie building your own "Eras" display or just love showcasing stunning multi-color prints, this model is ready to take center stage on your desk or shelf.

🌟 What’s New in V2?

• 🎨 4-Color Masterpiece: Carefully mapped out to use exactly 4 colors, giving you stunning detail without needing to swap spools mid-print. Because there are only 4 colors to use, I was not able to color her eyes, so this will still need to be done through paint pens or similar methods.
• 🖨️ AMS & Dual-Extrusion Ready: Perfectly optimized for the Bambu Lab AMS (4-filament setup) and the Snapmaker U1 (There is a trick to get the Snapmaker U1 file, select “Download STL/CAD” and you will see it in the list of files that you can choose from). Just slice, send to the printer, and watch the magic happen! I have even included a Print Profile (3mf file) that works directly with the Snapmaker U1.
• ✨ Plug & Play Profile: The 3MF file is fully set up with the colors and optimal settings for a flawless multi-color print.
• 📏 Perfect 90mm Scale: Retains the beautiful, display-ready 90mm size of the original model with all the intricate details intact.
• Inverted orientation and precise support settings make the supports almost fall off by themselves! NOTE: Be extremely careful when removing supports around the microphone. This is the most fragile part, and I even screwed up the first time I printed this myself and broke it at her wrist. But my second attempt was successful because I was meticulous when removing supports around the her wrist and microphone.

NOTE: I am working on a second version of this model where I will provide a ‘pause’ in the print to allow you to change out the red filament spool for a different color that you would like to use for the base. Right now without this pause the base will print in white because I tried the other colors and they just didn't look as good. The new version will allow you to replace the red (which is only used for the lips) with a gray or brown filament (or whatever color you choose, honestly) that will then be used to print the base. I think this will result in really cool looking prints and I would love to see what you guys choose and how it turns out, so please post photos of your prints along with your comments/reviews/boosts!

🛠️ Printing Recommendations:

• Filament: PLA works wonderfully! Choose your favorite vibrant colors to match her iconic tour outfits. I used a PLA silk for her hair to make it have an amazing shine, but try different colors. Make her look how YOU want.
• Prime Tower: Ensure your prime tower is enabled for crisp, clean color transitions without any bleeding.
• Infill/Supports: Use the print profile for the recommended supports to keep the microphone and dynamic pose looking flawless.
• Bambu Labs does not have a filament with a hue that is close to skin tones, so the filament I used for her flesh was “iSANMATE Matte PLA, Filament,Skin Color PLA 30-300mm/s 3D Printing Filament 1.75MM 1kg (2.2lbs) for Bambu Lab 3D Printers,AMS,AMSLite” from Amazon.

📸 Share Your Makes!

I can't wait to see the color combinations you all choose! Be sure to upload your makes, leave a rating, and please boost me so this model gets more visibility!

Download the print profile, load up your AMS or U1, and let's make the whole place shimmer! ✨