Zelda Princess
Print Profile(1)
Description
Sharing my model of Zelda the warrior princess figurine.
It is a complicated print - a lot of supports are required, be careful while removing the supports around her hand. I actually used little snips to cut the support tubes into little sections to carfully wiggle free, I was in the process of painting and just figured I would hand paint, there will be a lot of post-processing.
Even though it's possible, I do not recommend printing it on A1 due to the slinging/moving bed, but the model will fit and do so as you wish, I absolutely recommend to slow down the accelerations! The vibrations would impact the quality of the model.
Printed on a H2D
Global Settings as follows:
.16 Balanced Quality Profile
.4 nozzle
textured plate
top z distance at .18 (could possibly bump to .2)
Object Settings
Top surface pattern Monotonic with 4 top shell layers
5 wall loops
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)