Tales From the Crypt Keeper

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Loved this show as a kid and figured why not :) 
 

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #9d2235 PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6
    #5e43b7 PLA BambuLab Basic Purple  Transmission Distance: 5
    #56b7e6 PLA #BambuLab Matte Sky Blue  Transmission Distance: 1
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3.2
    #61c680 PLA #BambuLab Matte Grass Green  Transmission Distance: 2
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 4.8
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
This print uses 8 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #9 (0.8mm) swap to BambuLab Basic Maroon Red
    At layer #10 (0.88mm) swap to BambuLab Basic Purple
    At layer #13 (1.12mm) swap to #BambuLab Matte Sky Blue
    At layer #17 (1.44mm) swap to BambuLab Matte Mandarin Orange
    At layer #20 (1.68mm) swap to #BambuLab Matte Grass Green
    At layer #22 (1.84mm) swap to BambuLab Basic Yellow
    At layer #24 (2mm) swap to BambuLab Basic Dark Gray for the rest.