Hulk Vs Ironman

Randomly the old Justice League Task Force came to mind the other day for SNES and then I started thinking how awesome it is to see two super heroes fight from time to time and this match up came to mind.  Marvel vs DC's always a blast imo.  

 Project: Hulk Vs Ironman.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #507526 PLA BambuLab Basic Mistletoe Green  Transmission Distance: 0.1
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.5
    #9d2235 PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 1.8
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #9 (1.12mm) swap to BambuLab Basic Mistletoe Green
    At layer #13 (1.44mm) swap to BambuLab Basic Sunflower Yellow
    At layer #17 (1.76mm) swap to BambuLab Basic Maroon Red
    At layer #18 (1.84mm) swap to BambuLab Basic Red
    At layer #20 (2mm) swap to BambuLab Basic Cyan
    At layer #22 (2.16mm) swap to BambuLab Matte Ivory White for the rest.