Foldable bike stand (Print in Place)
Print Profile(2)
Description
Bicycle stand for parking bikes without a built-in kickstand.
The bike stand is foldable and can therefore be taken along on tours.
A second variant with a significantly larger base plate has been added to the print profiles. It is no longer as small but a bit more stable.
After unfolding the bike stand, a crank arm is inserted into the receptacle from above, and the bike stands securely. The dimensions and the receptacle were tested with 4 mountain bikes (29" and 26") and worked without problems.
The crank arms of the bikes are all approximately 35 mm wide, and the pedal is in the lowest position about 130 mm above the ground.
With other crank dimensions, the bike stand may not work.
Tested without problems with PETG Basic and PLA Tough+.
Boost Me (for free)
If you like the model and it simplifies your daily life, feel free to send a Boost!
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)