J.Schneider

cover

IMG_20260601_153052.jpg

IMG_20260601_154602.jpg

plate_1.png

<ul><li>Filament: PETG</li><li>Infill: 100%</li><li>Wandschichten (Walls): 2 Wandlinien</li><li>Schichthöhe (Layer Height): 0,20 mm</li><li>AMS / MMU: Nicht erforderlich</li><li>Ausrichtung: Flach auf das Druckbett gelegt, um die maximale Festigkeit entlang der Schichten zu nutzen (verhindert das Abscheren des Kopfes)</li><li>Support: Kein Support benötigt</li></ul>

<ul><li>Filament: PETG</li><li>Infill: 100%</li><li>Walls: 2 walls</li><li>Layer Height: 0.20 mm</li><li>AMS / MMU: Not required</li><li>Orientation: Printed flat on the build plate to utilize maximum strength along the layers (prevents the head from shearing off)</li><li>Support: No support needed</li></ul>

PETG, 0.2mm layer, 2 walls, 100% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees.
Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms.
You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.

This work is licensed under a Standard Digital File License – Community Use (SDFL‑C).

Ein funktionaler und robuster Erdnagel zur sicheren Befestigung von Unkrautvlies, Geotextilien, Gartenplanen oder Abdecknetzen. Perfekt für das nächste Gartenprojekt!Dieses Design wurde gezielt konstruiert, um gute Haltekraft im Boden zu erzielen und gleichzeitig einfach druckbar zu sein.&nbsp;<ul><li>Effektive Widerhaken: Mehrstufige, scharfe Widerhaken am Schaft krallen sich fest in die Erde und verhindern, dass sich der Nagel durch Windzug oder Materialspannung von alleine lockert.</li><li>Breiter Halteteller: Der flache T-Kopf sorgt für eine flächige Halteüberpressung. Das Vlies wird sicher nach unten gedrückt, ohne dass es an den Rändern einreißt.</li><li>Kein AMS nötig: Das Modell ist für den einschichtigen Monodruck optimiert. Einfach slicen, drucken, fertig!</li><li>Vollständig skalierbar: Brauchst du längere Anker für sehr lockeren Sandboden oder kürzere für härteren Lehmboden? Skaliere den Nagel im Slicer einfach nach deinen Bedürfnissen (für maximale Stabilität Z- und XY-Achse gleichmäßig anpassen).</li></ul><h2>Druckempfehlungen &amp; Material</h2><ul><li>Material: * PETG (Empfohlen): Bietet eine hervorragende Flexibilität und UV-Beständigkeit für den permanenten Außeneinsatz.<ul><li>ABS / ASA: Wer es noch robuster und schlagfester braucht (z.B. für das Einschlagen mit dem Hammer in festere Böden), sollte zu ABS oder witterungsbeständigem ASA greifen.</li><li>(PLA wird für den dauerhaften Außeneinsatz im Boden aufgrund von Feuchtigkeit und biologischem Abbau nicht empfohlen).</li></ul></li><li>Infill: 100%</li><li>Ausrichtung: Flach auf dem Druckbett liegend drucken, um die maximale Schichtfestigkeit entlang des Schafts zu nutzen.</li></ul>&nbsp;---------------------------------------------------------------&nbsp;A functional and robust ground peg for securely fastening weed barrier fabric, geotextiles, garden tarps, or netting. Perfect for your next gardening project! This design was specifically engineered to provide excellent holding power in the soil while remaining incredibly easy to print.<ul><li>Effective Barbs: Multi-stage, sharp barbs along the shaft lock firmly into the ground, preventing the peg from loosening due to wind pull or material tension.</li><li>Wide Retaining Cap: The flat T-head ensures flush surface pressure. It securely holds the fabric down without tearing the edges.</li><li>No AMS Required: The model is optimized for single-material printing. Just slice, print, and you&#39;re good to go!</li><li>Fully Scalable: Need longer anchors for loose, sandy soil or shorter ones for harder clay? Simply scale the peg in your slicer to fit your needs (uniform scaling across Z and XY axes is recommended for maximum stability).</li></ul><h2>Print Recommendations &amp; Material</h2><ul><li>Material:<ul><li>PETG (Recommended): Offers excellent flexibility and UV resistance for permanent outdoor use.</li><li>ABS / ASA: If you need it even more robust and impact-resistant (e.g., for driving it into harder ground with a mallet), you should go with ABS or weather-resistant ASA.</li><li>(PLA is not recommended for permanent outdoor ground use due to moisture and biodegradation).</li></ul></li><li>Infill: 100%</li><li>Orientation: Print lying flat on the build plate to utilize maximum layer strength along the shaft.</li></ul>

A functional and robust ground peg for securely fastening weed barrier fabric, geotextiles, garden tarps, or netting. Perfect for your next gardening project! This design was specifically engineered to provide excellent holding power in the soil while remaining incredibly easy to print.<ul><li>Effective Barbs: Multi-stage, sharp barbs along the shaft lock firmly into the ground, preventing the peg from loosening due to wind pull or material tension.</li><li>Wide Retaining Cap: The flat T-head ensures flush surface pressure. It securely holds the fabric down without tearing the edges.</li><li>No AMS Required: The model is optimized for single-material printing. Just slice, print, and you&#39;re good to go!</li><li>Fully Scalable: Need longer anchors for loose, sandy soil or shorter ones for harder clay? Simply scale the peg in your slicer to fit your needs (uniform scaling across Z and XY axes is recommended for maximum stability).</li></ul><h2>Print Recommendations &amp; Material</h2><ul><li>Material:<ul><li>PETG (Recommended): Offers excellent flexibility and UV resistance for permanent outdoor use.</li><li>ABS / ASA: If you need it even more robust and impact-resistant (e.g., for driving it into harder ground with a mallet), you should go with ABS or weather-resistant ASA.</li><li>(PLA is not recommended for permanent outdoor ground use due to moisture and biodegradation).</li></ul></li><li>Infill: 100%</li><li>Orientation: Print lying flat on the build plate to utilize maximum layer strength along the shaft.</li></ul>

Print Profile(1)

Description

Print Recommendations & Material

Comment & Rating (0)

License