Print Profile(5)
Description
Keychain Ring with Chain / Chain with Ring
Have you just printed a spectacular keychain and are missing the chain ring? Now you have a quick and functional solution to attach your new keychain with your keys, to your backpack, or wherever you want to carry it.
Boost Me (for free)
If the model is useful to you, I would appreciate it if you leave a like, a comment, and if possible, a boost to reach more people. Thank you.
Features:
- Design.- A design similar to conventional rings with a relatively long chain for comfortable keychain handling.
- Size.- The ring has a diameter of 22mm with a chain of approximately 30mm. Required keychain hole diameter 3.5mm.
- Durability.- Although it may seem fragile, it is not. It has undergone various changes and improvements to achieve a fully functional and resistant model.
- Important.- If PETG is used, check that it does not have moisture as it can crystallize and break when assembled.
Printing Features:
Recommended Filament: PLA.
Minimum keychain hole diameter: 3mm.
AMS: NO
Tolerance: 0.2mm
Walls 3
Infill 15% Gyroid.
Supports: NO.
ASSEMBLY
Each link is fully individual, but they may stick together during printing. To detach them, take each link and rotate it slightly until they separate. Do not apply force.
RING ASSEMBLY
To prevent the plastic from deforming, it is necessary to place the charm diagonally.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)