Centauri Carbon 1 w/Canvas Top Cover

I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in order to help make this cover as short as it is. It now sits flush with the top of the printer while still allowing usage of the spool holders. If you are like me a print from your filament dryer or dry box then you will not be required to relocated the number 1 and number 4 spool holders. There are 3 additional items required to complete this print for the Centauri Carbon. First is the pass through adapter linked below, second is the 14"x14"x1/8" Acrylic panel linked in the materials section, and third is the 6"x6"x1/8" Acrylic panels linked in the materials section. This upload includes my full design along with printable 3"x6" windows for the smaller Canvas side windows and the larger 6"x6" windows along the other sides of this top cover. You can also use the Centauri Carbon 1's top glass if you want.

 Also if you have a Centauri Carbon 2 I also designed the same shorter Top Cover for the Centauri Carbon 2 w/Canvas so checkout my other files!

Can't wait to see what peoples prints of this in. Happy printing!

UPDATE 6/6/2026!!! I have uploaded an addition file for this project. The CC1 required a spacer for the canvas mount to sit flush properly. That spacer file is now included. See updated images. This spacer sits on top of the existing foam padding. I just cut out the holes in the padding for the bolt holes instead of fully replacing mine. This is not required on the CC2 version.

 Please note that for the pass through ptfe fittings I used this model from Ruedli on Printables.com:

www.printables.com/model/61689-pivoting-panel-pass-throughs-for-4mm-ptfe-tube

Additional Items Required:

Top acrylic panel 14"x14"x1/8" from Amazon.com Qty 1 NOT REQUIRED FOR CENTAURI CARBON 1, YOU CAN REUSE YOUR STOCK TOP GLASS :)

Notes:

No cutting required, opening design to fit this panel. This comes in a 2 pack. Opening also fits the stock Centauri Carbon 1'd glass top. https://www.amazon.com/dp/B0C3V29HHH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Side Acrylic panels 6"x6"x1/8" from Amazon.com Qty 1

Notes:

No cutting required. side windows designed to fit this panel. These come in a 6 pack enough for 6 of the 8 side windows. You will need to use the smaller 3d printable window panels included in the file for the Canvas side windows. https://www.amazon.com/dp/B0DL35VTQB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1