Hex Holes Tolerance Gauge 4-8mm (M2-M5 nuts)

This is the Hex Holes Tolerance Gauge 4-8mm. You can measure the socket tolerance required for metric nuts like M2, M3, M4, M5.

If you have fast project  but in the same time you want to check required measurements for mosts used nuts in 3D printing this model is for you.

All intel you need on just 2 plates. First one you print verticaly and second one horizontaly.

For PETG filament it is highly recommended to dry it first (I usually dry PETG at 65°C for 8h) so the gauge will be more accurate and precise.

There are 2 versions with embossed and dembossed text. I didn't colored them because it was supposed to be a fast project for my project. Use any version you want and you can color it by painting or changing filament color on certain layers in preview tab (if that matters for you).

My inspiration to make this model was Hole Diameter Tester Horizontal & Vertical because I liked the simplicity of this gauge. I decided to design similar one but with exact hex hole sizes I wanted for M2-M5 nuts.