Double dovetail locking box
Print Profile(1)
Bill of Materials
Description
Puzzle box with self locking magnetic piston, very strong and accuracy
Print in PLA or PETG
You need 2psc of round magnet dimmension D5x4mm or D5x3mm depend of how strong locking you need
On plate 1 part cover lid, there is automatic pause during printing, after pause you must insert round magnet D5x4mm or D5x3mm, you must put to the bottom of hole in the corner, if you dont push magnet to the botton of the hole for it - magnet will be above next layer and will be on colision with nozzle and it is possible to damege the nozzle
On plate 3 are two kind of locking piston, smaller piston make stronger locking force, higher has amaller force, which you use is depent to you preferences, hole in piston helps remove the supports after printing and remove magnet if polarity is dont correct. Better check the polarity and then pusch it into the piston socket in right direcrion
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)