Print Profile(1)
Description
Selphy Gallery Frame – Minimal 10x15 Wall Photo Frame
A minimal wall photo frame designed specifically for Canon Selphy CP1500 photo prints.
This frame is made for creating a clean and lightweight photo wall. It is designed to be attached easily to the wall with double-sided tape, without needing screws, nails, hooks or extra hardware.
The frame height/thickness is intentionally kept low to avoid bulkiness on the wall. This also helps the model print faster and use less filament.
Features
- Designed for Canon Selphy CP1500 photo prints
- Minimal and clean photo wall look
- Easy wall mounting with double-sided tape
- No screws or extra hardware required
- Low-profile design
- Lightweight
- Uses very little filament
- Simple and fast print
No supports needed
Model Dimensions
- Outer size: 140 x 190 mm
- Thickness: 4 mm
- Designed for Selphy photo paper / 10x15 style prints
The visible window is designed to hide small white borders and alignment differences in Selphy prints, so the photo looks cleaner inside the frame.
Recommended Print Settings
Tested / prepared in Bambu Studio.
- Printer: Bambu Lab P1S
- Nozzle: 0.4 mm
- Layer height: 0.20 mm
- Filament: PLA / PLA+
- Infill: 10–15%
- Supports: No
- Brim: Not required in most cases
- Prime Tower: Off
- Ironing: Optional
- Build plate: Textured PEI Plate
If you use a textured PEI plate, the bottom surface can have a nice satin / slightly shiny texture. You can use the plate-facing side as the visible front side if you like that finish.
Mounting
Attach the photo to the back of the frame with thin double-sided tape.
Then attach the frame to the wall using double-sided tape.
Perfect for building a lightweight photo gallery wall with Canon Selphy CP1500 prints.
License
Comment & Rating (1)