Scooter Frame Ignition Coil Holder
Print Profile(1)
Description
ATTENTION: M4 nuts must be co-molded, so there's a pause in the print profile. Use regular nuts, not self-locking ones, because they won't fit.
To test them, insert the nuts once the print is stopped: they must not protrude from the part's surface.
Hello everyone! A friend of mine ( davidegonnella99@hotmail.it ) is developing a track-use scooter, and to give it the most original look possible, he is trying to keep anything from protruding from the fairing. A kind of sleeper! He has modeled many objects, and I am making the plastic ones! Here they are!
This is an ignition coil holder to be fixed on the frame, for tubes approximately 32mm in diameter. 3 M4 screws are used on top and the original coil screws to close it underneath, while to prevent rotation on the frame, two M4 nuts have also been co-molded to secure pointed screws or grub screws on both sides!
Boost Me (for free)
If you would be so kind as to help me buy an H2C...
Also in my models, you will find a Polini manifold riser and a dummy spark plug for using a dial indicator!
Intake Riser:
https://makerworld.com/en/models/2780697-polini-360-manifold-riser-code-210-0425#profileId-3090327
Dummy Spark Plug
https://makerworld.com/en/models/2780681-spark-plug-adapter-for-dial-indicator#profileId-3090309
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)