AR15 Stock, long, adjustable, Slinghammer
Print Profile(0)
Description
Adjustable AR15 shoulder stock in a long version (approx. 240mm) with a cheek rest.
Printing material - PETG, or at your discretion
Stock, Pad and Bolt - Layer height at your discretion (this print here, e.g., 0.25) / Infill 20% / Supports no
Cheek rest - Layer height same as stock / Infill 100% / Supports yes (printed standing on the front side)
Lever - Layer height 0.20 / Infill 100% / Supports yes (printed standing on the rear edge)
An M3 tap set is required for manufacturing (only cut through with the 1st tap, if necessary, cut the first 3 to 4 turns with the 2nd tap. This way the threads remain stable and self-locking ;-) )
Also required: 1 pc compression spring, approx. 10 - 12mm long, and 10 pcs. M3 x 8 mm screw
Only tighten the screw for the 8mm bolt on the lever enough so that the bolt remains movable.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)