gummi goo hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
PolyLite Black Transmission Distance: 0.3
BambuLab Matte Dark Brown Transmission Distance: 2
BambuLab Basic Mistletoe Green Transmission Distance: 1
PLA hobby lobby orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
BambuLab Matte Ivory White Transmission Distance: 3.5
Put PolyLite Black in slot 1,BambuLab Matte Dark Brown in slot 2 ,BambuLab Basic Mistletoe Green in slot 3 ,PLA hobby lobby orange in slot 4
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Brown
At layer #10 (0.88mm) swap to Mistletoe Green
At layer #15 (1.28mm) swap to orange
At layer #18 (1.52mm) swap to Yellow
At layer #19 (1.6mm) swap to Ivory White for the rest.
At layer #14 there is a pause swap PolyLite Black with PLA BambuLab Basic Yellow and swap BambuLab Matte Dark Brown with BambuLab Matte Ivory White
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)