Heavy-Duty Pattern Weights (for 70mm washers)

Heavy-Duty Pattern Weights (for 70mm washers)

Upgrade your sewing room with these sleek, functional, and highly effective Pattern Weights.

Design & Specifications

This is a two-piece shell (base and cap) that features a smooth screw-on thread mechanism to securely lock the weights inside. No glue or snapping required!

It is perfectly sized to house two standard metallic washers with the following dimensions:

• Outer Diameter: 70mm
• Inner Hole: 25mm
• Thickness: 5mm (per washer, 10mm total per weight)

Features

• Fabric Friendly: The smooth 3D-printed exterior ensures no sharp metallic edges touch or snag your beautiful fabrics.
• Heavy & Stable: By utilizing two thick 70mm washers, each unit provides a substantial, low-profile weight that holds patterns perfectly flat.
• Threaded Lock: The cap screws on tightly, meaning the washers won't rattle or fall out if dropped.
• Stackable & Ergonomic: Easy to grab, move around, and store when your project is finished.

Recommended Print Settings

• Material: PLA
• Layer Height: 0.16mm
• No supports needed
• Wall Loops/Perimeters: 3 for extra durability around the threads.

I also have 2 more models for different size washers:

• For 2.5 inches external diameter and 1 inch inner hole https://makerworld.com/es/models/2956432-heavy-duty-pattern-weights-for-2-5in-washers#profileId-3313233
• For 70mm external diameter and 22mm inner hole https://makerworld.com/es/models/2948767-heavy-duty-pattern-weights-for-70mm-washers#profileId-3303590