Mercado Pago Card with Logo
Print Profile(2)
Description
Tarjeta para colocar en tu local o entregar con tu informacion
The card in the photo is an example, you can fill the space as you wish.
Layer height: 0.08mm
Line width: I recommend setting the top surface, inner and outer walls to 0.3mm for better quality in the letters and logo
Surface: do not modify the walls and leave “do not apply” in the advanced settings. This way, the last yellow layer will be made in a single pass and will not stop where the letters and logo will be.
Speed: leave the speeds lowered as they are, to achieve better quality and avoid many strings.
Measurements: 113mm long and 65mm wide, 2mm base and 1mm thickness for letters and logo.
If you have the possibility to use a 0.2mm nozzle, consider doing so for better definition.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)