lamp support with reflector

Portuguese below

I designed this model for my 100L aquarium, which has French braces (euro-bracing) that prevented a very firm attachment; the standard bases would always fall when I accidentally bumped into them during maintenance or feeding. I designed two types of bases: one with adjustable height and another with fixed height. This project is open-source and can be modified for each aquarium. I will include the description of the non-printable items below.

Material list:

20mm pipes (outer dimensions), usually 3/4".

Electrical wires: the wire diameter depends on the type of light source to be used; for 10W LED floodlights, 1.5mm wires can be used.

Male power plug

Connection insulator (electrical tape) If you do not have a timer, you can use a switch.

I recommend using PETG as it is safer and more stable for water quality if there is contact, but it can be printed in PLA like mine.

*****FOR AQUARIUMS OVER 1.5 METERS, THERE MAY BE A SLIGHT BENDING IN THE PIPE WHERE THE FLOODLIGHTS WILL BE PLACED*****