pumpDIY

cover

PXL_20260530_012252566.jpg

PXL_20260530_012257130.jpg

PXL_20260530_013456664.MP.jpg

plate_1.png

4f698cee513f8b7a.jpg

0.2mm layer, 2 walls, 15% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

「リトルミイ」をモチーフにした、高さ30mmのミニマルで可愛いイヤリング（ピアス）です。 Bambu LabのAMS（マルチカラーシステム）に対応しており、色分けされた状態で綺麗に一体印刷ができます。<ul><li>サイズ: 高さ 約30mm</li><li>仕様: 3Dモデル自体に金具用の穴は空いていません。印刷後、ミニピンバイス等でトップに穴を開けてヒートン（アイピン）を差し込むか、お好みの金具を接着してご使用ください。</li><li>印刷のヒント: 小さく精密なモデルのため、ビルドプレートをしっかりと洗浄し、定着に不安がある場合はブリム（Brim）を設定して印刷することをおすすめします。</li></ul>作品が気に入ったら、ぜひ「Boost（ブースト）」、いいね、または印刷した写真の投稿をお願いします！<h3>英語（English）</h3>Title Example: Little My Earrings - Multicolor AMS (30mm)Description: A cute and minimal 30mm tall earring inspired by &#34;Little My&#34;. Designed for Bambu Lab AMS (Multicolor), allowing you to print the beautifully color-separated model easily.<ul><li>Size: Approx. 30mm in height</li><li>Note: There are no pre-made holes for jewelry hardware. After printing, please drill a small hole at the top using a pin vise to insert an eye pin, or glue your preferred earring findings directly to the model.</li><li>Printing Tips: Since this is a small model, ensure your build plate is thoroughly cleaned. Adding a brim is recommended to ensure good bed adhesion.</li></ul>If you like this design, please consider giving it a &#34;Boost&#34;, a like, or sharing your print photos! Happy printing!

These are minimal and cute earrings (or pierced earrings) 30mm high, inspired by "Little My." They are compatible with Bambu Lab's AMS (multi-color system), allowing for beautiful multi-color printing in a single piece.<ul><li>Size: Approx. 30mm in height</li><li>Specifications: The 3D model itself does not have holes for hardware. After printing, please drill a hole in the top with a mini pin vise to insert an eye pin, or glue your preferred hardware.</li><li>Printing Tips: Since this is a small and precise model, ensure the build plate is thoroughly cleaned. If you are concerned about adhesion, it is recommended to set a brim for printing.</li></ul>If you like this work, please give it a "Boost", a like, or post your printed photos!<h3>English</h3>Title Example: Little My Earrings - Multicolor AMS (30mm)Description: A cute and minimal 30mm tall earring inspired by &#34;Little My&#34;. Designed for Bambu Lab AMS (Multicolor), allowing you to print the beautifully color-separated model easily.<ul><li>Size: Approx. 30mm in height</li><li>Note: There are no pre-made holes for jewelry hardware. After printing, please drill a small hole at the top using a pin vise to insert an eye pin, or glue your preferred earring findings directly to the model.</li><li>Printing Tips: Since this is a small model, ensure your build plate is thoroughly cleaned. Adding a brim is recommended to ensure good bed adhesion.</li></ul>If you like this design, please consider giving it a &#34;Boost&#34;, a like, or sharing your print photos! Happy printing!

Print Profile(1)

Description

English

Comment & Rating (0)

License