Laguna Throat Plate with Zero Clearance Inserts

This is a throat plate I designed that fits the Laguna Fusion 1 table saw. It should fit other laguna table saws as well.  Modeled with a sliding dovetail insert so you don't have to reprint a new throat plate if you are using different width blades, dados, and blade angles.  Just a quick  print of the insert and you can have one for any and every occasion.  Has 4 holes sized for heat set threaded inserts that will accept M6 set screws ideally 10-12mm in length. You will need to take the washer and screw from original throat plate to be able to retain its locked down feature.

First model I've published so feel free to comment if you have any tips or design ideas.  I printed mine with PETG-CF 4 walls 25% infill, except the locking blocks which I printed at 100% infill.  They are a friction fit and a little tap with a mallet will set them in there for good.

Thanks for looking

Loflandcustoms