Guts Berserker

Bring the Black Swordsman directly to your desk! This detailed model features Guts from the legendary manga/anime Berserk in his fearsome Berserker Armor. With the "Dragon Slayer" drawn and his cape flowing, this figure is an absolute must-have for any dark fantasy fan.

The dynamic pose and sharp details of the armor make this model a real eye-catcher and a great painting project.

Printing Recommendations:

• Layer Height: 0.12 mm or finer (e.g., 0.08 mm) is highly recommended to optimally showcase the fine grooves of the armor and the texture of the sword. Resin printers (SLA) will bring out the absolute maximum detail here, but it will also look fantastic on FDM printers.
• Infill: 10% - 15% (Gyroid or Lightning). For the arm holding the sword, a modifier with slightly higher infill is recommended for additional stability.
• Supports: Absolutely necessary! The massive sword, cape, and overhanging armor parts need good support. Tree supports (tree structures) are the best choice here, as they can be removed more cleanly from the armor.
• Brim: A brim is recommended so that the figure adheres securely to the plate during printing movements, especially due to the leverage of the large sword.

Happy printing! If you like the model, feel free to leave a rating and show me your painted makes in the comments!

This is an unofficial fan-made 3D model (fan art). All rights to the character, design, and associated franchise belong solely to the respective original creators, rights holders, and publishers. This model was created out of pure fan passion and is intended for private, non-commercial use only. Selling these 3D files or the resulting printed physical models is not permitted.

🧩 Quality & Feedback
• Please post a "Make" with a photo – it helps others and improves visibility.
• Feedback/Issues: Briefly state: Printer, Material, Layer Height, Temperature, Photo of the problem area.

📄 License / Usage
• Private use according to the model license.
• Commercial use (sales/shop/production) only with a corresponding commercial license membership.

🛠️ Troubleshooting (Brief)
• Stringing: Slightly lower temperature + check retraction/travel.
• Elephant's foot: Reduce first layer flow/temperature or use Elephant-Foot-Compensation.
• Connector too tight: Check calibration/flow, do not scale; if necessary, lightly sand.

My Setup – for a better overview and as a transparent insight into my current equipment. This is how my personal work and tech setup is presented.