Kitchen Towel Rail

A kitchen towel holder and accessory bar with a modern, geometric, and minimalist design, specifically created to be 3D printed without complex supports and installed in seconds without drilling holes in tiles

Thanks to its clean-designed side supports and shaped hooks, it is perfect for organizing tea towels, pot holders, and kitchen utensils, adding a touch of style and modernity to your home

In the photos there are green hooks, you can find them in the hooks project

🛠️ Assembly:

• Join the central cylinder, making sure the side holes align where the stopper cylinder will then be inserted, add the left and right side supports to the cylinder aligning the holes, insert the pins from behind the supports on both sides, and finally apply a small drop of glue

   

⏱️ Easy and Secure Installation (No Drilling!)

To ensure maximum hold without damaging walls, the project has been structured for application with high-quality double-sided tape (e.g., 3M, TESA, PATTEX, etc.). For optimal hold, do not use low-quality or old double-sided tape

How to best install it:

1. Clean the surface: Wipe the tile with an isopropyl alcohol cloth to remove any traces of grease or dust
2. Apply the double-sided tape: Cut and apply the excellent brand double-sided tape over the entire flat surface of the 3D printed support
3. Pressure: Position the towel holder and press firmly for at least 10 seconds
4. Wait before use: For optimal adhesive strength, it is recommended to wait 30 minutes before hanging wet towels or heavy accessories

🎨 If you liked the design, leave a Like, a review with photos of your make, and happy printing!

• For a successful print it is mandatory to use the Bambulab glue stick on the build plate.

•  If you have printed my model, please leave a comment with a photo and feedback, Boosts are highly appreciated if this model worked well for you, thank you very much!

   

• If you encountered printing issues, report them to me immediately so I can correct any errors.
  
   

👇🏻👇🏻👇🏻Check out my other models too👇🏻👇🏻👇🏻

👉🏻👉🏻👉🏻⭐️⭐️⭐️⭐️⭐️🤩 https://makerworld.com/it/@xSolowJonel/upload 🤩⭐️⭐️⭐️⭐️⭐️👈🏻👈🏻👈🏻