SIAECOSYS DKD V2 Support

3D Printed Mount for SIAECOSYS DKD LCD 72V Electric Motorcycle Display

3D designed mount to adapt and install a SIAECOSYS DKD LCD 72V display on an electric motorcycle. This display is normally used in systems with CAN/LIN communication and Votol / SIAECOSYS type controllers, so the mount is designed to facilitate its installation in electric motorcycle conversion, repair or customization projects.

The design is intended to hold the screen cleanly and securely, taking advantage of the display's rear shape and leaving the connector area accessible. It is a useful part if you need to replace the original mount, adapt the screen to another motorcycle or integrate it into a custom fairing/handlebar.

Compatibility

Designed for the display:

SIAECOSYS DKD LCD 72V
LCD display for electric motorcycle
CAN/LIN communication
Compatible with Votol / SIAECOSYS controllers depending on configuration

Features

• Specific mount for SIAECOSYS DKD LCD display.
• Designed for 3D printing.
• Allows adapting the display to custom mounts.
• Keeps the rear connector area clear.
• Ideal for electric motorcycles, EV conversions or repairs.
• Simple, functional and easy-to-print part.

Printing Recommendations

• Recommended material: PETG, ABS or ASA.
• PLA only recommended for testing or indoor use, as it can deform with sun or heat.
• Recommended infill: 30–50%.
• Layer height: 0.2 mm.
• Walls: 3 or more perimeters.
• Supports: according to print orientation.
• It is recommended to test the fit before final assembly.

Notes

This mount has been designed for personal use and shared so that other users can adapt this display in their projects. Check the measurements of your display before printing, as similar variants of the same display may exist.

English version

3D printed mount for SIAECOSYS DKD LCD 72V motorcycle display

3D printed mount designed for the SIAECOSYS DKD LCD 72V electric motorcycle display. This screen is commonly used with CAN/LIN communication systems and Votol / SIAECOSYS controllers, making this part useful for electric motorcycle conversions, repairs, or custom dashboard installations.

The mount is designed to hold the display securely while keeping the rear connector area accessible.

Compatible with

SIAECOSYS DKD LCD 72V
Electric motorcycle LCD display
CAN/LIN communication
Votol / SIAECOSYS controller compatible depending on configuration

Features

• Custom mount for SIAECOSYS DKD LCD display.
• Designed for 3D printing.
• Useful for custom electric motorcycle builds.
• Keeps the rear connector accessible.
• Good replacement or adaptation part.
• Simple and functional design.

Print settings

• Recommended material: PETG, ABS or ASA.
• PLA only for testing or indoor use.
• Infill: 30–50%.
• Layer height: 0.2 mm.
• Walls: 3 or more.
• Supports: depending on print orientation.