Simple DualHook

DualHook

A clean, minimal wall hook designed to hold almost anything — bags, coats, tools, and more. Features two hook levels and dual side pegs for hanging smaller items securely.

Features

• Dual hook design for versatile hanging
• Side pegs for small items
• Slim profile: 100 × 50 × 24mm, hook depth 30mm
• Single-piece print — no assembly required
• Screw holes (φ5mm, depth 10mm) for secure wall mounting

Print Settings

• Material: PLA Matte recommended
• Supports: Minimal supports required
• Single part

Installation

• Secure with 2 screws (φ4mm or less, white head recommended for a clean look)
• Through-hole design (φ5mm)
• Note: When mounting on drywall, avoid hanging heavy items. For full strength, mount into a wooden stud behind the drywall.

DualHook

This is a simple wall hook that can hold anything, such as bags, coats, and tools. It features two hook levels and side pegs to securely hold small items.

Features

• Versatile design with dual hook levels
• Side pegs securely hold small items
• Slim size: 100 × 50 × 24mm, hook depth 30mm
• Single-piece construction, no assembly required
• Screw holes (φ5mm, depth 10mm) for wall mounting

Print Settings

• Recommended material: PLA Matte
• Supports: Minimal required
• Single part

Installation

• Secure with 2 screws (φ4mm or less, white head recommended for a discreet finish)
• Through-hole design (φ5mm)
• Note: When mounting on drywall, hanging heavy items may result in insufficient strength. We recommend mounting in a position where screws reach the wood stud behind the drywall.