Elden Ring Sigil Sword Mount — Tarnished's Display

Elden Ring Sigil Sword Mount ⚔️🔥

A detailed Elden Ring inspired wall mount display designed for fantasy swords, cosplay props, and collector setups.

This piece includes a decorative center sigil shield with matching side holders, giving your sword a clean mounted display look instead of just resting it on basic hooks. Great for displaying printed props, painted swords, fantasy weapons, or gaming room decor.

Designed to work as a clean wall-mounted display for larger fantasy weapons while still being printable on Bambu machines. The center sigil gives the mount a more finished collectible look, while the side brackets support the sword or prop from the cross-guard area.

🎨 Perfect For

✅ Elden Ring fans
✅ Fantasy sword displays
✅ Cosplay props
✅ Gaming rooms
✅ Collector wall decor
✅ Painted display pieces
✅ 3D printed weapon displays
✅ Prop photography and display setups

🔧 Print Notes

✓ Designed for Bambu CoreXY printers
✓ Tree supports recommended for cleaner results
✓ Print orientation is already set in the profile
✓ Keyhole slots added on the back for wall mounting
✓ Use normal wall screws or drywall anchors depending on your wall type
✓ Slow outer walls can help preserve the raised sigil and edge details
✓ Works well as a display mount for printed swords, cosplay weapons, and lightweight props

🧼 Before Printing

Please clean your build plate before starting the print. A dirty or oily plate can cause lifting, warping, or poor bed adhesion, especially on larger flat pieces.

Recommended prep:

✓ Wash the plate with dish soap and warm water, then dry fully
✓ Avoid touching the print surface after cleaning
✓ Use glue stick or liquid glue if your plate normally has adhesion issues
✓ Add a brim if you notice any edge lifting
✓ Watch the first layer to make sure it is sticking evenly before walking away

🧱 Wall Mounting Note

This model uses recessed keyhole slots on the back. For best results, use pan head or round head screws. Avoid countersunk flat head screws since they may not lock into the keyhole slot as well.

• If mounting into drywall, use proper drywall anchors. For heavier swords or props, mounting into studs is recommended.
• Always test the fit and strength of your mounting setup before placing a heavy prop or sword on the wall.

📏 Scaling & Keyhole Slot Note

This wall mount can be scaled up or down depending on your sword size, display space, and wall mounting needs.

If you scale the model, make sure to also check the negative keyhole slots on the back. The current keyhole slot size in this model is:

9.50 mm x 21.86 mm x 6.00 mm

This size is intended for a normal pan head or round head wall screw. If you use a different screw size, you may need to resize the negative keyhole slot before slicing.

Quick guide:

✓ Larger screw head = widen the keyhole opening
✓ Thicker screw shaft = widen the narrow slot
✓ Taller screw head = increase the 6.00 mm depth slightly
✓ Do not use countersunk flat head screws, they may not lock correctly
✓ Always slice preview the back side before printing to confirm the keyholes cut properly

For best results, test your screw fit before mounting the final display.

⚠️ A1 / A1 Mini Note

This profile was tuned on CoreXY machines. It should still print on A1 / A1 Mini, but slowing speeds slightly and using a brim can help with stability, especially on the larger center sigil piece.

A dedicated A1 / A1 Mini profile may be added later.

🌑 More Elden Ring Prints

If you like this print, check out my other Elden Ring 3D prints below:

Elden Ring 3D Prints Collection:

I’ll be adding more Elden Ring talismans, weapons, wall displays, cosplay props, Zelda-inspired prints, anime-related models, and collectible display pieces regularly.

If that sounds like your kind of stuff, a follow would help a ton and you’ll see new models as they go live 🙌

If you print this, I’d love to see how it turns out. Photos, painted versions, sword setups, and feedback are always appreciated