Print Profile(1)
Description
The file was carefully hand-drawn in CorelDRAW as a clean vector design, then converted into a 3D object in Fusion 360. This ensures clean straight lines, precise angles, and smooth curves.
The light box is fully ready for printing.
The box consists of two parts — a front and a back piece. The LED strip is attached to the back part, with a 3.5 mm opening for the cable. The back piece is glued to the front piece, leaving a 0.2 mm tolerance for easier assembly and featuring a 7 mm internal guiding edge.
C200 wood glue was used for assembling the parts. It dries in about 30 minutes, giving you enough time for careful and stress-free assembly.
The file is fully prepared for printing, and all necessary settings have already been completed.
3D printing settings
Printer used: Bambu Lab P2S
Material used:Bambu Lap Basic PLA
Size:
-Light box : 243 mm x 179 mm x 4,5 mm
-Stand : 80 mm x 44 mm x 4,5 mm
Filament:
-Face: 132 gram
-Back: 84 gram
-Stand: 34 grama
Printing time:
-Face: 3:11 h
-Back: 1:29 h
-Stand: 0:56 h
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)