Keyrambit Greninja (NO AMS)

NO AMS

📌 Project Overview
This is a custom-designed, highly detailed Keyrambit (Karambit) inspired by the iconic Pokémon Greninja. The model features a stylized aesthetic that captures Greninja's signature look, including its sleek head profile, sharp crests, and distinct color palette (Dark Navy, Crimson Red, Cobalt Blue, White, and Pastel Pink).

The entire model has been meticulously split into individual, flat multi-layered parts (plates) based on their colors. This specific layout is optimized for 3D printing, allowing you to easily print each color section separately and assemble them afterward—perfect for single-extruder printers (like the Bambu Lab A1 mini) without needing an AMS / multi-material system!

Material: PETG (Recommended for higher durability and impact resistance during flips) or PLA.

Layer Height: 0.20mm Standard works perfectly.
 

🛠️ Assembly Instructions
Print all 6 plates using your respective filament colors.

Carefully clean off any stringing or small brims from the edges using a hobby knife or light sandpaper.

Use the main white/translucent frame (Plate 01) as the base skeleton.

Fit and glue the colored accent parts (Plates 02–06) into their designated slots on the main frame using standard 3D-printing-safe superglue (Cyanoacrylate).

Enjoy your custom Greninja Keyrambit!

Tip: If you want a perfectly smooth and premium feel on the touch surface, you can enable Ironing for the top surfaces in your slicer settings!