Pokeball Grenade | Pull pin and handle flies off

Summary

I choose you PokeGrenade!  This model is a Pokeball inspired grenade combo with a handle that flies off when you pull the pin.   No AMS is needed and assembly takes seconds.

Spring options (for flying handle)

1. Metal Spring (recommended) – if you have a metal spring, even a pen spring will usually work, then print the metal spring profile.  It is designed to work with the Bambu Store's 0.5x7x12mm spring (linked lower on the page).  If you use a pen spring, you can usually cut it in half and get two springs.
2. Plastic Spring – if you don't have a metal spring, but still want the handle to fly off, then print the plastic spring profile.
   1. If the spring eventually wears out, just print a new one and pop it in.
   2. Don't leave the spring under tension when not using it as it will wear out much faster.
   3. Avoid Matte and Silk filament for the spring itself, Basic and Metal work better.
3. No Flying Handle - if you don't want the handle to fly off and just want a grenade model, simply print either version and don't put in a spring.

Bambu filaments used

• Metal Iron Gray Black
• Matte White
• Matte Red

Metal Spring Version Assembly

1. Combine the “button” components as you see below.

2. Then, use the provided pegs to combine the body of the model with the button inserted.  You can alternately insert the button peg afterwards.

3. Next, insert the little black peg into the grenade topper.

4. Then, place your spring in the same way as the peg.

5. Lastly, screw the top onto the grenade body.

Plastic Spring Version Assembly

1. Combine the “button” components as you see below.

2. Then, use the provided pegs to combine the body of the model with the button inserted.  You can alternately insert the button peg afterwards.

3. Next, insert the spring into the black grenade topper, making sure the peg is sticking out the bottom as you see below

4. Lastly, screw the topper onto the grenade body.

( ! ) Do not sell my prints — I have not authorized selling prints.  If you sell my prints on Etsy, Amazon, eBay, etc, I will find out.

This 3D print is intended for decorative purposes only and is not suitable for children. Small parts may present a choking hazard and edges may be sharp. By printing this 3D print, you assume all liability for any harm to yourself or others resulting from its use.