Shower Shelf V3
Print Profile(1)
Description
This is a shower shelf for mounting on a standard 25mm diameter rod. All standard shower gel containers should fit inside.
All parts have rounded edges. The bottom of the baskets is also rounded internally to prevent dirt accumulation.
It consists of four parts:
- Front bracket
- Rear bracket
- Left basket
- Right basket
For assembly, you will need:
- 8x M3x20 stainless steel screws (20mm long)
- 8x M3x6x5 heat-set inserts (6mm long)
Assembly:
The front of the bracket has 4 holes for screwing the bracket together. These screws are visible from the front. The back has 4 holes on the inside for melting in the inserts.
There are 2 holes on the underside of each basket for melting in the inserts.
All inserts must be melted flush!
Then mount the bracket with the left and right overhang pointing downwards (See image of the assembled bracket without baskets). Finally, place both baskets and screw them to the bracket from below.
Printed on Bambu Lab X1 Carbon with PETG HF at 0.2 mm.
I used 15% infill; you can also use higher values if you want it even more stable.
Enjoy your shower!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)