Philips Drip Tray

drip tray for Philips coffee machine

improved version by our friend @3D-Miche, who provided a solid base for the design to which we added a handle and modified the logo so that it can be glued onto the tray

• Drip tray to be printed in two plates. (if you wish, you can combine both, logo and tray, on the same build plate, but I don't recommend it too much)
• Tray printed with support for the handle. (try to adjust your support so that it sticks as little as possible, or consider changing material)
• Printed in PLA Basic Black and Jade White from Bambu Lab.
• glue the logo in the designated spot with a special PLA glue like: “Kraftprotz”

Here is the original model page: https://makerworld.com/fr/models/2617549-rinse-water-container-for-philips-coffee-machines#profileId-2888678

feel free to support him!

Thank you for your kindness and feel free to comment with any questions.