Paw Patrol Tonie Shelf

Here I created a Tonie shelf for my daughter for her Paw Patrol Tonies and of course for her other ones.

It is the Paw Patrol Headquarters. There are a total of 9 parts that are assembled. I glued them together with plastic adhesive.

I would first glue each level and then gradually add the next one.

It's a pretty big project. In terms of filament, it was about 3 kilos, and the print time is a bit long but I think it's impressive.

Her eyes at least lit up, and that's the most important thing to me.

I also glued magnets on it, which are available on Amazon: https://www.amazon.de/dp/B0DPMQQK9C?ref=ppx_yo2ov_dt_b_fed_asin_title

I downloaded the emblem at the bottom from Neggan, it just needs to be scaled down to 50%. I also sent him the file so he can upload the finished model directly. Please feel free to leave him a Boost, like, or picture, thanks: https://makerworld.com/en/models/820511-paw-patrol-logo#profileId-763485

I made the Tonie emblem myself and will upload it to my profile as well if anyone wants it.

You can easily screw the shelf to the wall, I created 6 holes. However, I also designed a stand if you want to place it freestanding, which I will of course also upload.

Of course, you don't have to use it as a Tonie shelf, I think children will play with it as is.

Dimensions are: 48 cm wide, 67 cm high, and 14 cm deep. (with stand, it is 29.5 cm deep)

I hope you like it, and you'll send me pictures, comments, and likes, and of course, I would appreciate a Boost.