Magnetic Box
Print Profile(2)
Bill of Materials
Description
!!Please read description to have a nice quality print!!
⚠️ Important Printing Notes
Please do not flip the lid upside down in the slicer profile and do not disable supports, as this may lead to poor print quality. I personally had some failed prints because of this, so I highly recommend keeping the original setup.
However, if you have PETG and an AMS system, you are in luck 😊
You can simply use the “Magnetic Box (PETG Support)” profile to achieve the cleanest and highest-quality surface finish possible.
Thank you for your understanding and support!
🔨 Magnet Installation
Installing the magnets into their slots may require a bit of force. In most cases, a few gentle taps with a hammer should be enough to fit them securely into place 👍
📏 Technical Specifications
• Magnet size: 6 × 3 mm
• Dimensions with lid: 100 × 130 × 95 mm
• Dimensions without lid: 100 × 130 × 80 mm
• Internal volume: approximately 700 ml
Boost Me (for free)
This model took a fair amount of time and effort to design and optimize
for a clean printing result. If you enjoy the model, we would really
appreciate a comment and a boost — it is completely free and
helps us a lot ❤️
Have a problem?
If you encounter any issues or have questions, feel free to leave a comment. We will try to respond as quickly as possible.
License
Comment & Rating (3)